10 Best Ar 10 Scope Mount 2022 – Reviews & Guide
If you are looking for a Ar 10 scope mount, then you have come to the right place. While there are many available options in the market out there, narrowing down your choices is necessary to ensure that you will get the best one that will suit your needs.
So, if you want to get the best Ar 10 scope mount, here are some of the things that you need to consider:
Get a Picatinny rail – this type of mount features a slot system that is used on firearm accessories. There are also differences based on their length and width. The slot sizes can also vary from one another but they all offer high compatibility to different types of accessories available in the market.
It should be made from quality materials – generally, most Ar 10 scope mounts are made from aluminium or steel. Both are great materials for these types of mounts but it would be better if you choose one that is made from steel since it can withstand more pressure than those made from aluminium.
There are a wide variety of mounts that will work just fine, but there are some out there that don’t really meet up to the requirements for using it on a AR 10.
Some of the things you want to look for in a AR 10 scope mount are:
- Tall enough to get a good cheek weld on your stock
- The mount needs to be strong enough to hold the biggest scope you have or think of buying.
- Mounting holes that are spaced correctly. (This is where it gets tricky)
- The mount should be lightweight and durable.
- Price – Most people buy the least expensive thing they can find, but sometimes spending a little more money will get you a much better product.
Our cantilever scope mount is designed to increase the forward positioning of any riflescope, allowing the correct eye relief and head placement that is crucial for high-performance shooting. High-quality aluminum construction protects your rifle’s receiver from unnecessary damage, and the 2-inch offset positions the centre of the riflescope tube 1.59 inches away from the base.
There are complaints about it being too flimsy with ar 10 308 and other heavy scopes around.
- Help gain correct eye relief and head placement
- Made of high quality aluminum
- Not strong enough for ar 10 308 and other heavy scopes
The AR-P.E.P.R. mounts by Burris provide a means of full-sized scopes to be properly positioned on Arms with a Picatinny rail upper receiver and allow for up to 2″ of forwarding scope positioning; providing proper eye relief.
The cantilever design will also support 20 MOA cants (allow for greater elevation adjustment), and mounts easily to any Picatinny rail uppers receiver with just 3 screws or bolts.
The only negative point of this mount is its comparatively higher price tag.
- Allows 2 inches of forwarding positioning
- Perfect for hunters, duty officers and competitive shooters
- Provides optimum eye relief and full field of view
- Includes both smooth and Picatinny ring tops
Constructed from lightweight, high-strength alloy with a non-reflective black anodizing finish, our non-reflective tactical (MSR) mount is perfect for your flattop rifle.
It attaches directly and securely to Picatinny rails and keeps riflescopes properly aligned with iron sights during scope mounting.
The problem with this Nikon mount is its inability to fit every base without modification.
- Made of high-quality aluminum
- Easy to install
- Non-reflective black anodizing finish
- will not fit base without modification
The most popular rings and bases for tactical rifles are the 30 mm medium ring and the 34 mm high ring. Warne has expanded their line of rings and bases to allow for this growing market segment while bringing technology and manufacturing efficiency to these products as well.
Features include Warne’s proprietary single screw mounting system, built-in hardened steel torque mount locking lug, machined from steel alloy bar stock and protected with a black manganese phosphate finish, which assures a perfect hold time after time.
It would do a lot of good if it is available in a variety of colours, otherwise, it’s a pretty perfect product and worth all your money.
- Holds zeroing
- Impressively accurate
- Lightweight aluminium
- Need more colours
The AD-Recon mounts to all standard Picatinny rails and has a solid, secure grip. It is easy to adjust, does not require proprietary tools for adjustment, can be adjusted with your finger or a flat blade screwdriver, and can be configured to lock to the rear.
The AD-Recon clamp surfaces are larger than other mounts on the market and have been designed to ensure maximum rail engagement for a solid hold. It meets 1913 Mil-Spec Rail height specs and works with scopes with Objective Housings Up To 2.2 Inches In Diameter.
The American defence scope mount is a worthy product, however, the unit itself is comparatively heavier than most competitors which is the only drawback we could find in this amazing scope mount.
- Less expensive as compared to competitors
- Made of high-quality aluminum
- Two locking tabs ensure utmost safety
- Easy to adjust
- Quite heavy
These lightweight aluminium rings mount to the industry-standard Picatinny or Weaver-style bases and create a mounting platform for your front-sight system. They’re available in 1″ and 30mm sizes, with six screws for extra security and clamping pressure.
Available with or without two crossbolt screws, which lockdown on the open sight to prevent any movement under heavy impact.
There are complaints about the packaging of the product plus some users found the rings to be mismatched.
- Easy mounting
- High quality
- Cost effective
- Flimsy rings
Larue Tactical Rifle Scope Rings provide a rock-solid base for your optics. Just align your reticle using the integrated QD pop-up sights and tighten the torqued screws to mount any Mil-Spec or commercial rifle scope, red dot sight, or reflex magnifier without having to remove the optic from the rings.
Your new position will be 1.28″ above the top of the rail, giving you more rail space for accessories, and keeping them closer to the top of the scope for maximum eye relief.
One of the major flaws in this scope mount is the complication of the installation process.
- Provides good eye relief
- Made of high-quality aluminum
- The optic can be removed and replaced without the loss of zero
- The installation process is a headache
The XP Tactical Scope Mounts are made to withstand the toughest recoil and hold zero. They are constructed from 7076 aluminium, which is then machined to a tolerance of .001.
The instant we started mounting scopes on these rails, we were amazed at how solid they felt. Once mounted you can truly feel the weight difference. At only 15 oz’s., they are very lightweight scopes for tactical use.
The rails come with self-centring, black zinc-coated hardware for precise alignment to your receiver, and corrosion resistance.
Once installed, it works amazingly well, however, the mounting process is somewhat pain in the ass.
- Built like a tank
- Looks good
- Made in USA
- A little hard to mount properly
There are a lot of scopes mounts out there but the truth is they all suffer similar drawbacks. They stick outside of your rifle, get in the way and make mounting and unmounting your scope a hassle.
We wanted to fix that problem without adding more bulk so we created our Universal scope mounts. It’s the perfect solution for giving any scope a solid, stable mounting platform.
The bubble in this scope mount is relatively smaller than others and that’s the reason why it’s hard to see clearly sometime.
- Easy to install
- Great quality
- Great for target shooting and long-range hunting
- Smaller bubble than others, hard to see at times
This is a must-have item for all compound bow archers. The Bubble Level will help you shoot more accurately by providing you with the ability to level your bow with a bubble that is magnified 3X.
This super-durable tool is made from ABS plastic and features Tenpoint s high-quality TenPoint logo.
There are quite a few complaints about falling of the bubble vial level. You’ll have to glue it to use it properly.
- Ensures bore and reticle alignment at a glance
- Accurate shooting with 11mm dovetail
- Offers quick reference
- The bubble vial level fall out at times